The Under-Appreciated Benefits Of Ghost Immobiliser Problems

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable item from theft. It is discreet and doesn't require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then authorize the start-up of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of security products that are available including tracking systems, immobilisers and alarms. Not all of them are equally effective in protecting your car. While a tracking system can assist you in locating your vehicle in the event of theft, it will not stop the crime from occurring in the first place. Immobilisers, on the contrary, do exactly what they say on the label - they shut off your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to take your car.

Using the existing buttons in your car The ghost device is able to create an exclusive sequence that has to be entered prior to the engine starts. This can be done using the window, heater or indicator stalk buttons. In addition to this, there is also an app for mobile devices that can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great option when you wish to donate your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is an innovative and unique device that works with the buttons on your vehicle rather than as a standalone unit. This means that it's not just a powerful security measure against theft from your vehicle but can also be transferred to any future vehicles you may have, making it more investment-wise than traditional steering wheel locks.

Weatherproof, tiny device

The Autowatch ghost alarm installation immobiliser is an advanced security system that protects your pride and joy against key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be installed in the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique that car thieves use to circumvent immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch ghost doesn't emit LED indicators and instead uses the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. The sequence can be extended by up to 20 presses how to install ghost immobiliser provide additional security. The iPhone app permits only one, authenticated connection using a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN is entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) to allow you to transfer your vehicle to a valet service or for maintenance without having to enter a pin code.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a customized code. The system can be activated and deactivated using your own smartphone app without the need for wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. It transmits a message to the ECU. The car will start when the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields you from key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief get it, and they would still not be able to drive it.

Ghost makes use of the buttons on your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique PIN code that is changeable that must be entered before you can drive. This is not required to use additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

ghost immobiliser install is more difficult to remove than car alarms that require disarming by pressing the buttons. This makes it a fantastic addition to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to look too far on social media sites to find stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without your original key fobs.

The Ghost immobiliser was designed to stop this, and give you an extra layer of security to keep your vehicle from being targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code must be entered along with your original key fob in order to prevent the vehicle from beginning. The unique override pin is found on a black plastic card which you will receive following the installation. It is easy to remember because there are no LED indicators.

The device is hidden within the vehicle's wires and does not emit radio signals, therefore it can't be detected by modern criminals with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to the tracker.

Unlike most other security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also fully service/valet mode-compatible and a good alternative to a tracker having your car in for an electrical fault at the dealers.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. It's more easy than ever to steal your pride and joy due to the availability of key cloning tools and door lock picks. To combat this we now offer the autowatch ghost installer (visit the up coming site) Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your car was stolen.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent as it does not use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also stops the user from using an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden within your car by using buttons on the steering wheel, centre console & door panels. A unique and changeable PIN code sequence of up to 20 digits must be entered before you are able to start your vehicle.

This is the first aftermarket CAN-bus immobiliser for the market that has been developed. It will prevent your vehicle from being driven or even started if you don't enter a PIN code before entering. If you are driving away with the device armed it will display an indicator on your dashboard which will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN at this time the indicator will continue to flash and will require a new PIN code every time you attempt to start your vehicle.