See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable property from theft. It's discreet and does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence of up to 20 presses. This then authorizes the vehicle to start.

Simple process to change the PIN code

With the rising rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a variety of aftermarket security devices that range from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your vehicle. A tracking system can help you locate your vehicle in the event of it being stolen however it cannot prevent the crime. An immobiliser, on the contrary is exactly what is a ghost immobiliser says on the tin: it disables the engine of your vehicle so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

The ghost 2 immobiliser installation near me device utilizes the buttons on your car to create a unique sequence which must be entered in order for the engine to begin. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without having to use the button sequence. This is especially useful when you need to hand your car over for valet parking or servicing since the immobiliser will still be activated and not disabled.

The Ghost is a truly unique and innovative device that is used in conjunction with the buttons of your car rather than as a separate unit. It's not just an effective deterrent to vehicle theft, but it can also be used on any future vehicles you own. This makes it a far more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your car from key cloning and hacking. It also stops ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be placed in the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices, which is an approach used frequently by car thieves to circumvent the immobilisers in place.

The advantage of using CAN data is that it operates in a silent manner compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, centre console, or doors, to create a unique disarming sequence. The sequence can be extended to 20 or more presses for additional security. The iPhone app permits only one, authenticated connection using a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run only if a valid PIN is entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can hand your car to a valet or service without needing to enter a code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to disable your car's system from going through its normal startup routine until you input the passcode you have created. The system can be activated and deactivated by using your smartphone's app without the need for additional wires.

Standard factory immobilisers in automobiles function through a transponder inside the key, which sends an indication to the ECU. If the correct code is sent the car will begin, but if a transponder is replaced with one from a different vehicle, the immobiliser cannot recognize it. This enables the vehicle to start and be stolen. The ghost installation immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It guards you against key cloning or hacking, and security even key theft. Only by physically towing your car away can thieves steal it, and they would still not be able drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to create an unique, changeable PIN code sequence that needs to be entered before you can use your car. This is performed without the need for additional hardware like a key-fob and can be as long as 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that a system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is hidden within the vehicle so it can't be taken away or disabled by thieves. It is also harder to remove than a car alarm, which requires disarming with a button sequence. This makes it an excellent addition to an GPS tracking device that can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You do not have to go far on social media to find stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and centre console. The unique pin code must be entered along with your original key fob to stop the vehicle from getting started. The unique override pin is found on a black card which you will receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden inside the vehicle's wires and does not emit radio signals, so it cannot be identified by modern criminals with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to the tracker.

Unlike other security systems, which rely on a relay in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely by sending the use of a digital block of commands for both the ECU and the engine.

These systems can also be connected to a separate alarm, immobiliser or tracker. This should be specified prior to installation. They are also compatible with valet and service modes, and are a great alternative to a tracking device if you take your car into the dealer for repairs to an electrical issue.

Service/Valet Mode

In recent times there has been an increase in vehicles being stolen with no owner's keys. It's more easy than ever to steal your pride & joy thanks to the availability of key cloning tools & door lock picks. To prevent this from happening, we are now offering the Autowatch ghost immobiliser problems (https://williams-barry.technetbloggers.de/the-most-common-mistakes-people-make-With-ghost-immobiliser-for-sale) immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent, as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects you from adding an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console & door panels. A unique & changeable PIN code sequence that can be as long as 20 digits needs to be entered before you are able to start your car.

This is the first aftermarket immobiliser CAN bus that has been designed to stop your car from being moved away or even started in the event that a PIN code hasn't been entered before. If the device is activated and you try to drive away, it will display an indicator on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point it will deactivate the anti-hijack and your car will continue to drive in the normal way. If you don't enter your PIN code at this point, the warning will continue to flash and will require another PIN code for every attempt to start your car.