Patio Doors Repairs: What's The Only Thing Nobody Is Talking About

Sliding Patio Doors Repairs

Your sliding patio doors will let in natural light to your home, and will increase the efficiency of your home's energy usage. Over time, they may begin to show signs that need some attention.

Luckily, the majority of problems with sliding patio door repair service doors are fairly simple to fix. Find out how to keep your sliding patio doors looking like new.

Tracks that are dirty or damaged

The tracks of your sliding patio door may be filthy or clogged. Over time, the grit and grime from daily use accumulates on the track and can cause the door to jam or even collapse completely.

Including regular light cleaning of sliding doors and tracks in your household chores can help to reduce the amount of accumulation. Start by cleaning large debris off the tracks. Then apply warm water and non-abrasive cleansing products such as dish soap to wipe them down. Vinegar can be added to your cleaning solution to get rid of stubborn grease and dirt stains.

If you notice that your sliding door doesn't move smoothly after completing these steps, it could be a sign of more serious damage and requires a professional repair or replacement. There are a few simple solutions you can try before calling in professionals to avoid expensive repairs or replacements.

It is important to put a doormat on the bottom of your sliding doors in order to keep dirt out before it can reach the tracks. Also, you should cut back any bushes or plants near your sliding doors to reduce the amount of debris tracked into the tracks. Finally, be sure to close the door properly so it doesn't slam into the tracks and damage the wheels and rollers. By keeping your doors clean and lubricated you can prolong their lifespan considerably.

Rollers that are not aligned

Sometimes, a patio sliding may become out of alignment. Most often, this is due to dirt or other obstructions which can be easily removed. Sometimes it's due to bent tracks or a bent roller. In the latter case you might be able to realign the roller by extracting them using their adjustment screws and then cleaning them using rubbing alcohol. Be careful when working with these parts, as they are delicate.

If your doors are sticking, you can lubricate the rollers. This will lessen friction and allow them to slide more easily. It is best to make use of a silicone-based lubricant because petroleum-based lubricants can attract dirt faster. It is also important to clean the tracks and rollers prior to applying lubricant.

After cleaning the rollers you can put them back in place using the adjustment screws. Use the same lubricant you used to clean them. Be sure to push the rollers all the way in their channels when reinstalling them. You can test your door now and see if it slides smoothly.

If the issue persists it could be necessary to remove your door and examine the tracks and rollers for any more serious issues. If the tracks or rollers are badly bent they might need to be replaced. In this case it's best to contact a professional for the installation.

Warped Glass

Sliding glass doors are ideal for bringing in the outdoors and natural sunlight into a room, but they can also be susceptible to damage that requires repair or replacement. Cracking, warping and fading are a few of the most frequently encountered issues. Warping occurs when the components which make up your sliding glass patio door repairs door start to degrade due to exposure to heat, sun and other environmental elements. Cracks are often caused by the impact of a collision, for example from a lawn mower or ball run-in, and fading generally happens due to repeated contact with sunlight and other elements of nature.

If your sliding patio glass repair near me doors aren't easy to close or open it could be an indication that their rollers and tracks aren't functioning properly. This could be due to accumulated dirt, rust or debris in the track, misaligned wheels or the lack of lubrication. This issue can be solved by cleaning the tracks and rollers and removing obstructions.

The locking mechanism may also be defective, making it difficult to open or close your sliding patio doors repair near me doors. This could be due to an issue with alignment or wear and tear, but the solution is to adjust the locking mechanisms by using the adjustment screws located at the bottom of the track.

Air leaks or drafts around your sliding patio doors are a common problem that can drastically reduce their energy efficiency. They usually result from worn weather stripping and poor alignment of the doors and can be easily fixed by replacing the old weather stripping and re-aligning the doors.

Loose Handle

It can be frustrating when the handle of sliding doors becomes loose. It becomes difficult to open the door. This problem is usually caused by an improperly aligned locking mechanism, which can be fixed by loosening the screws that secure it and then tightening them until they fit against the jamb of the door.

A loose handle could result from the handle separating from the spindle connecting it to the inside or handles on the outside. This is usually the result of a mix of factors, including over use wear and tear or simply aging. If the issue isn't addressed promptly, the handle could become loose and fall off.

The most effective way to address this problem is by first locating the screws that attach the handles' exterior and interior. They are usually hidden by plastic tabs, which can be removed using a flathead screwdriver (or in the case of certain handle styles, a Phillips-head screwdriver). Securely store these screws to avoid losing them.

After removing the old handles then the next step would be to remove the spindle. This can be accomplished by tapping the spindle using a mallet or hammer until it comes loose from its place within the door. The new handle can be installed by simply placing the spindle through the hole on the interior handle and then putting the other end of the spindle into the hole in the outside handle. Once the handle has been installed and tightened, screw back the screws and then test to make sure the lock and unlock mechanism works properly.

Unusual Weatherstripping

Weatherstripping that's cracked or worn can allow water and air to seep into your patio door, which can compromise your home's comfort and energy efficiency. In addition to letting in moisture, it can create drafts and also increase your heating or cooling costs. It is good news that replacing damaged weatherstripping is an easy fix that doesn't require professional help. The first step is to remove the old stripping by loosening its staples with a screwdriver or prying it gently using the help of a putty knife before pulling it away from the door. Then, you can clean the area and apply a fresh layer of weatherstripping. This is backed by a foam seal to stop leaks and improve comfort.

If your sliding patio doors aren't operating as they should, it's crucial to fix the issue as soon as possible to prevent further damage and keep them in good condition for the long term. Depending on how serious the issue is and the severity of the issue, a DIY solution or a repair/replacement by a professional may be the best choice.

The most common issues with sliding patio doors include dirty rollers from debris in the tracks, misaligned wheels and a loose handle. In the majority of cases these issues can be fixed with regular maintenance and cleaning, which includes oiling the track and rollers, as well as adjusting them and tightening the hardware. If these solutions do not work then you should seek professional advice in order to make sure that your patio is functioning as it should. If you decide to replace or repair your patio door handle repair near me door, make sure to check its warranty information to make sure that it's covered by the manufacturer's warranty. This could save you money on repairs or replacements in the near future.